Product Specification
Brand | Shanghai DaAo Safety Protection |
Condition | New |
Warranty | YES |
Product Descriptions
Steel fume hood material specification
a resist material
1-1 countertops resist: high-quality 12.7mm US Wilsonart solid physiochemical board table, and the leading edge was thickened to 25.4mm thick arc with liquid leakage prevention function .
Second, the upper part of the cabinet
2-1 Case Material: 1.0mm thick with a new high-quality cold-rolled sheet, the anode plate membrane treatment. Acid and alkali paint EPOXY coating treatment.
2-2. Inner material (side plate, back plate, top plate, deflector plate): adopt 6mm thick anti-Beit plate, acid and alkali and organic solvent.
2-3. Baffle holder: PC material one piece molding, activity combined into a convenient demolition, and a fixed composite frame function.
2-4 sets hood: a 5mm thick PP material produced
2-5 auxiliary half-moon holes: the use of high-quality 1.0mm thick cold-rolled sheet, the hydraulic forming one, EPOXY coating.
Third, adjust the door system
. 3-1 activities sliding door: single up or down, with a balancing device, sliding door can be stopped at any point of activity.
3-2. Sliding door glass: 5mm thick tempered glass.
3-3. Sliding door suspension cable: cable tension of 450 kg.
3-4. Windows chute: the use of PP material.
Fourth, the power supply apparatus
4-1 operational dashboard: thin-film micro-electronic circuit of the touch control panel, standard power supply, lighting, motors, spare (switch) and LED running lights.
4-2. Protection devices: power, motor, socket, leakage, overload, phase loss, reverse and other fault protection.
4-3. Lighting device: 30W fluorescent lamp.
4-4. Socket: 220V grounded single-phase socket.
V. drainage
5-1 laboratory Cup slot: integrally molded with PP, thickness 3mm flexible, and acid, heat and organic solvents. Size: L260 * W148 * 220mm.
Sixth, the water supply device:
6-1 water faucet: single statements using copper faucet.
Seven, the lower part of the cabinet (general counter-bottom):
7-1 back, sides, panel: adopt 1.0mm thick cold rolled plate production, EPOXY coating, acid and organic solvents.
7-2. Door: 1.0mm thick cold-rolled plate production, the EPOXY spray treatment, acid and organic solvents.
7-3. Handle: C type metal handle.
7-4. Hinge: The use of metal hinges.