Audio-Technica AT-LPW40WN Fully Manual Belt-Drive Turntable, Plays 33 1/3 & 45 rpm Vinyl Records, Dynamic Anti-Skate Control, Built-In Cartridge, Carbon-Fiber Tonearm, Walnut | AT-LPW40WN

AT-LPW40WN Fully Manual Belt-drive Turntable The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM. The turntable includes a straight carbon-fibre tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input. Key Features • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM • The motor features a speed-sensor system to maintain accurate platter rotation speed • Fully manual operation • Adjustable dynamic anti-skate control • Professional anti-resonance, die-cast aluminium platter with rubber mat • AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus • AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application • Straight carbon-fibre tonearm with hydraulically damped lift control and lockable rest • Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer • Built-in switchable phono pre-amplifier for phono or line-level output • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover Specifications Type Belt-drive manual turntable Motor DC servo with Active Speed Stabilization Drive Method Belt drive Speeds 33-1/3 RPM, 45 RPM Turntable Platter Die-cast aluminum Wow and Flutter Signal-to-Noise Ratio >60dB Output Level Pre-amp “PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 35 dB nominal, RIAA equalized Power Supply Requirements 100-240 V, 50/60 Hz, 0.5 A Max. Dimensions 420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H Weight 4.72 kg (10.40 lbs.) without dust cover Accessories Included Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge, 45-RPM adapter, RCA audio cable (approx. 1.0 m (3.3')), AC adapter (approx. 1.5 m (4.9