AUTOCLAVE 21 LITERS
Send a free RFQ and get the supplier's best price.
Trade with confidence on Abraa
Safe and secure payments using Abraa safe trade systems
Supplier verification not completed
Pay only through Abraa to stay protected. Never pay a supplier by direct transfer.
Secure Payment
Pay through Abraa, never by direct transfer to a supplier.
Product Inspection
Book a check before shipping to confirm quality and quantity.
Buyer Protection
Get support and refunds if goods arrive not as described.
Verified Suppliers
Licence, address and on-site checks by the Abraa team.
Product Specification
| Brand | - |
| Condition | New |
| Type | Other |
Product Descriptions
AUTOCLAVE 21 LITERS
__________________________________________________________________________________
Horizontal autoclave, for steam sterilization saturated with water under pressure. It efficiently, quickly and safely sterilizes all critical or semi-critical materials for medical and dental use. Its efficiency is based on three basic factors: saturated water vapor temperature; Exposure time and lethal effect pressure for any microorganism.
Aluminum cabinet with epoxy paint, which gives it a high standard of finish, without risk of oxidation, measuring 670mm depth, 460mm width, 400mm height and a weight of 32Kg.
Insulated sterilization chamber with glass wool blanket, made of stainless steel AISI 304-18 / 8, with 21 liters, covering a sufficient space for sterilization of boxes and surgical packaging; Support with two aluminum trays, perforated, removable, allow total cleaning of the inner chamber; Heating resistance coupled externally to the chamber, avoiding the undesirable contaminations and scale that occur in the immersion resistances.
Sized for use over sinks and dental cabinets, requiring no auxiliary furniture or adaptations outside dental standards.
Frosted aluminum chamber door with high pressure resistance; Door sealing system with high performance silicone trim resistant to temperature and pressure variation; Door with external barrier in structured high-impact polystyrene sheet prevents the user from touching the hot parts of the door and that vapors emitted when opening the door reach the user; Locking lever located on the left side of the autoclave.
Manual filling of the chamber with distilled water up to the mark indicated on the tank, using a graduated cup to measure the amount of water.
Valve with automatic opening against overpressure of the sterilization chamber if it exceeds 3.0 Kgf / cm2 and the overheating sensor automatically switches off the resistance if the temperature exceeds the set limit; Power of 654 W.
Control panel with LED door indicates whether the door is open or closed, LED heat indicates whether the resistance is on or off; Start key for start of cycle; on-off key; Thermomanometer indicates the pressure / temperature inside the sterilization chamber.
Pre-programmed standard autoclaving after reaching operating pressure and temperature with 8-minute cycle, steam saturated with water at 134 ° C temperature and pressure of 2.3Kgf / cm2 for unpacked, enveloped and packaged materials and instruments.
Electro-electronic devices provide protection against unexpected events.
At the end of the cycle automatic exhaustion occurs, the pressure gauge will reset and the autoclave will beep, all internal steam from the autoclave is drained to the exhaust gallon or to a special drain pipe; With door ajar and resistance off, starts drying with a cycle of up to 30 minutes.
They accompany disposal gallon with hose and clamp and water dosing cup for supply.
Apparatus subjected to a rigorous testing process with chemical and biological indicators during the qualification and receives the exclusive seal 3M that guarantees the quality of its sterilization.
\
Similar Products
View all
