Robust, jacket-cooled pumps for stationary and portable use. The SW pumps are ideally suited for irrigation and drainage tasks in clean and dirty water, also with abrasive sand and sludge contamination. Flooding of the motor by the conveyed medium ensures sufficient cooling and protects the motor from overheating, even with an extremely low water level (slurp operation). 

Waste water pump with jacket cooling                                                                                
Type Biral SW  2 - 7 SL 
with fitted float switch  
 
For detailed information refer to 
operating instructions : 08 0364.2120 
 
Delivery medium : and waste water with abrasive components (e.g. sand) 
Delivery head :  
Flow rate :  
Pumping-out up to : 25 mm  
Delivery branch : R1½"IG,  
Ball passage : Kugeldurchgang[P]  
 
Motor output P2 : 0.8 kW 
Motor output P1 : 1.2 kW 
Speed : 2900 1/min 
Voltage / frequency : 1~ x 230 V / 50Hz 
Rated current : 5 A 
Weight : 9 kg 
Starting : Direkt  
Motor cable : 10 m, 3x1,5mm2 
Power plug :