C-500 Printers
Send a free RFQ and get the supplier's best price.
Trade with confidence on Abraa
Safe and secure payments using Abraa safe trade systems
Supplier verification not completed
Pay only through Abraa to stay protected. Never pay a supplier by direct transfer.
Secure Payment
Pay through Abraa, never by direct transfer to a supplier.
Product Inspection
Book a check before shipping to confirm quality and quantity.
Buyer Protection
Get support and refunds if goods arrive not as described.
Verified Suppliers
Licence, address and on-site checks by the Abraa team.
Product Specification
| Brand | APEX |
Product Descriptions
The C-500 utilizes mandrels to support flexible or rigid parts to allow printing on their full length, and 360 degrees around.
Parts commonly printed on the C-500 include:
• Barrels • Bottles • Cartridges • Containers • Cups • Syringes • Tubes • Oil Filters
Be it a disposable syringe, a marker pen barrel, or a squeeze tube, the C-500 is one of the most flexible and versatile decoration systems on the market today.
The heart of the machine is a 6, 12, or 16 station servo driven index table with quick change horizontal or vertical mandrels mounted at centers around the machine.
Interfaced within are the appropriate:
Feeder / Loader
The feeding of components to the print system can be simple or sophisticated depending upon the type of product to be handled, and the production speed required. Typically hoppers and bowl feeds are utilized for smaller components, and inline conveyors or chutes for larger products.
Pre-Treaters
Gas treaters or corona discharge units are commonly used to pretreat plastic components to allow the highest quality of print and adhesion. Either system can be integrated within the C-500, and both are available in many different formats and types to suit every customer's unique requirements.
Machine Types
| C-500-3 | |||
|---|---|---|---|
| Part Diameter | min | 0.175" | 4.45mm |
| max | 6.00" | 152.4mm | |
| Part Length | min | 0.25" | 6.35mm |
| max | 6.00" | 152.4mm | |
| Copy Length | max | 3.00" | 76.2mm |
| C-500-6 | |||
| Part Diameter | min | 0.175" | 4.45mm |
| max | 6.00" | 152.4mm | |
| Part Length | min | 0.25" | 6.35mm |
| max | 10.00" | 254mm | |
| Copy Length | max | 6.00" | 152.4mm |
| C-500-9 | |||
| Part Diameter | min | 0.175" | 4.45mm |
| max | 6.00" | 152.4mm | |
| Part Length | min | 0.25" | 6.35mm |
| max | 10.00" | 254mm | |
| Copy Length | max | 9.00" | 226.6mm |
Decoration Unit
Any decoration technology can be integrated into the C-500. For multi-color applications, we suggest a dry offset print station. This can be supplied in different widths and with up to six color heads. For single color or overcoating applications we suggest the use of rotary silkscreening, rotary hot stamping, letterflex, or flexographic printing, with each type specifically designed and interfaced to suit your own specific requirements.
Dryers
Forced hot air, infrared, convection and ultra-violet curing units can be supplied to cure the appropriate ink for each customer's individual demands and requirements.
As with all Apex machines, we tailor each one to suit the individual customer's specification and requirements.
Technical
Up to 12" of copy can be printed on parts no more than 12" (304mm) in length and 6" (152mm) diameter. Production speed up to 200 parts per minute.
Electrical: 220, 380, 440 volt, single or 3-phase - 50/60 Hertz.
Pneumatics: 70-80 psi - 5 cfm.
\
Similar Products
View all
