Cannulate Drill - Normal For K-Wires And Hollow Tube Reamer Electric Canulate Drill
Send a free RFQ and get the supplier's best price.
Trade with confidence on Abraa
Safe and secure payments using Abraa safe trade systems
Supplier verification not completed
Pay only through Abraa to stay protected. Never pay a supplier by direct transfer.
Secure Payment
Pay through Abraa, never by direct transfer to a supplier.
Product Inspection
Book a check before shipping to confirm quality and quantity.
Buyer Protection
Get support and refunds if goods arrive not as described.
Verified Suppliers
Licence, address and on-site checks by the Abraa team.
Product Descriptions
Normal for K-wires and hollow tube reamer electric canulate drill
Product features
1.Apply to all kinds of brands of intramedullary nail and the kirschner wire operation.
2.For trauma surgery
3.Center hole diameter4.0mm. Because of precise concentricity improve the accurancy of operation and make the operation more perfect.
4.Cost effective and low noise
4.Large Battery Capacity
The battery capacity is larger than similar products in the market to make the power to satisfy the customers' needs.
5.Imported Motor
It can increase operation efficiency and precision.
Specification
|
Diameter of drill chuck |
0－8mm |
|
Input voltage |
110V-240V/50Hz |
|
Battery capacity |
1600mA/h |
|
Rated speed |
0－800rpm |
|
Rating torque |
6.3Nm |
|
Charging voltage |
14.4V |
|
Sterilization |
HTHP |
|
Sterilizing temperature |
134°C-138°C |
|
Noise |
≤60db |
Standard Configuration
1. One handpiece
2. Two batteries
3. One charger
4. One aseptic battery transfer ring
5. One operating manual
6. One guarantee card
7. One certificate
Warranty:
The handpiece guarantees for 1 year, the battery a guarantee for 3 months.
Notes
1、Before the operation,the bone drill must be sterilized according to the sterilization.Battery and charger must not be sterilized.
2、Before the operation,the battery must be filled,and the filled battery must be cooled and then put into the handpiece.
3、After use,must to be cleaned,then remove the battery.And don’t put the battery and the handpiece together.Do not drop impact , to damage the battery.
4、Don’t put the battery in the place where the temperature is higher than 40℃
5、If there is abnormal phenomena during the operation,stop using it.
6、Prohibited in flammable, explosive materials nearby
7、If don’t use for long time, the battery should be regularly charged to ensure the battery life.
\
Similar Products
View all
