Name: CR-C60 Tube End-forming machine
Rating: 4 (15 reviews)

اطلب عرض أسعار

<p>Conventional models - tube end-forming machine</p>
<ul>
<li>Suitable for the shrinking for various metal pipes with (1)different material. (2)different shape.</li>
<li>All the parts are made under very strict quality control, so the quality of machine is in high level and the specification is standardized.</li>
<li>Equipped with emergency stop device. Both manual & automatic operations are available.</li>
<li>Shrinking stroke 150 m/m. The length of working piece is 4,500 m/m Max. (but no limit on the minimum length).</li>
<li>An additional feeding system can be added to the machine. The operating security is greatly increased because the operators just do the unloading & collecting job of finished pipes.</li>
<li>Forming shapes can be convex, concave, sectional, long & flat, square, V-shape, open elbow, flat elbow...etc. The design of the tooling varies with work-piece & customers requirements.</li>
</ul>
<p>SPECIFICATION</p>
<table>
<tr>
<th><strong>TYPE</strong></th>
<th>O.D. * Wall<br />(mm)</th>
<th>Range of Pipe<br />(mm)</th>
<th>Horse Power</th>
<th>Pipe Shrinking Speed</th>
<th>Total Length</th>
<th>Total Width</th>
<th>Total Height</th>
<th>Total Weight</th>
</tr>
<tr>
<td>CR-C38</td>
<td>38*2.0</td>
<td>150</td>
<td>5HP</td>
<td>100mm 1.5/sec</td>
<td>2000mm</td>
<td>500mm</td>
<td>1200mm</td>
<td>1000kg</td>
</tr>
<tr>
<td>CR-C60A2</td>
<td>60*3.0</td>
<td>250</td>
<td>15HP</td>
<td>100mm 2.5/sec</td>
<td>3000mm</td>
<td>800mm</td>
<td>1400mm</td>
<td>2000kg</td>
</tr>
</table>

الكمية

اشحن إلى البلد

تايوان

مشترك منذ : 22-يناير-2017

YLM IBENDER

عضوية أساسية

اذهب إلى المتجر

اطلب عرض أسعار

الكمية

اشحن إلى البلد

آلة صنع القضبان

CR-C60 Tube End-forming machine

يسلط الضوء :

أقل كمية طلب : 1
الحالة : New
الضمان: : YES
بلد الشحن : تايوان

طريقة دفعة آمنة وموثوقة باستخدام منصة عبرة للدفع عبر الانترنت

تفاصيل المنتج

مواصفات المنتج

الماركة	YLM ibender
الحالة	New
الكفالة	YES

مواصفات المنتج

Conventional models - tube end-forming machine

Suitable for the shrinking for various metal pipes with (1)different material. (2)different shape.
All the parts are made under very strict quality control, so the quality of machine is in high level and the specification is standardized.
Equipped with emergency stop device. Both manual & automatic operations are available.
Shrinking stroke 150 m/m. The length of working piece is 4,500 m/m Max. (but no limit on the minimum length).
An additional feeding system can be added to the machine. The operating security is greatly increased because the operators just do the unloading & collecting job of finished pipes.
Forming shapes can be convex, concave, sectional, long & flat, square, V-shape, open elbow, flat elbow...etc. The design of the tooling varies with work-piece & customers requirements.

SPECIFICATION