Digital 5Kv Fast Transient Burst Simulator

A simulator to reproduce fast repetitive high frequency pulses which are generated when switching ON/OFF electric current on the inductive load. International Standard IEC 61000-4-4 defines immunity tests for power supply lines or I/O signal lines against fast transient repetitive bursts. Also adopted as a Japan Industrial Standard.

The noise which includes wideband frequency spectrum may be generated accompanied with ON/OFF of inductive load with a switch or relay.  Consequently, it may cause reflection, resonance or amplification with IC in inside of electronics equipments by its coupling with the wirings or substrates patterns and induce malfunctions of the equipments.

This noise is classified into two invasion routes. The one is conducted through a power supply line or interconnection line, and the one another is transmitted in space as an electromagnetic wave and flows into the inside circuit, eventually induces such coupling with the circuit.

“NoiseKen” INS series and FNS series can reproduce and simulate the noise intentionally for testing whether electronic equipments become malfunctioned or work correctly with the noises influence. FNS series can conform to IEC61000-4-4 Standard which is standardized by International Electrotechnical Committee = IEC, and INS series can conform to some Japanese Standards.

In “NoiseKen” INS series, since the noise can be injected between LINE –LINE (Normal mode) in addition to the injection between
LIND – GND (Common mode), more effective and pursuant counter measures against the noise can be realized.