GCT-Polyurethane Pipe and Salb/Board Insulation
Send a free RFQ and get the supplier's best price.
Trade with confidence on Abraa
Safe and secure payments using Abraa safe trade systems
Supplier verification not completed
Pay only through Abraa to stay protected. Never pay a supplier by direct transfer.
Secure Payment
Pay through Abraa, never by direct transfer to a supplier.
Product Inspection
Book a check before shipping to confirm quality and quantity.
Buyer Protection
Get support and refunds if goods arrive not as described.
Verified Suppliers
Licence, address and on-site checks by the Abraa team.
Product Specification
| Brand | Gulf Cool Therm Factory L.L.C |
| Condition | New |
| Warranty | YES |
Product Descriptions
INSULATION MATERIAL
General Description
Gulf Cool Therm Polyurethane CFC Free Rigid Foam (PUR) is one of the
most efficient, high performance insulation material, enabling very
effective energy savings with minimal occupation of space.
Gulf Cool Therm Manufacturers CFC free rigid closed cell foam in a wide
range of densities for different applications.
Density 35 to 65Kg/m3 for Pipe, Slab, Equipment, Vessel and Tank Insulation.
Density 80 to 120Kg/m3 for use in thermal Supports.
Gulf Cool Therm Polyurethane CFC Free Rigid Insulation is 95% closed cell
and provides a long end satisfactory service life.
Gulf Cool Therm Polyurethane Foam can be used in many different applica-
tions in the process plant, Oil, Gas, refinery, Cold, Cryogenic and
Air-conditioning industries. Standard foam meets the requirements of the
German specifcation DIN 4102, Class B2/B3. If a higher performance level is
required we can supply foam that meets DIN 4012 Class B1.
Where higher temperature and/or better fire performance is required we
recommend to use the Gulf Cool Therm Polyisocyanurate Insulations.
Gulf Cool Therm Polyisocyanurate meet the requirement of BS 476 part 6 &
7, Class 1 and ASTM E-84.
DENSITY
35 Kg/m3 to 65Kg/m3-Density for Pipe, Slabs, Board, Vessel, Tank,
Equipment, Cryogenic Insulation.
80Kgm3 to 360Kg/m3-Density for Thermal Supports. Other densities are
available upon request.
SIZES
Pipe Sections up to 125 MM OD supplied in two half section. Sizes over 150
MM OD can be supplied in segments or two half sections as required.
Board/Slabs 1000 MM x 1000 MM OR 2000 MM x 1000 MM, Other sizes are
available upon request.
AVAILABILITY
Slabs / Board, Pipe Sections, Pipe Fittings, Including Elbows, Tees, Reducers
etc...
FINISHING
PIPE SECTION with reinforced Aluminium Class ‘1’ foil faced.
PIPE SECTION with reinforced aluminium Class ‘O’ foil faced.
PIPE SECTION with Aluglass foil faced (Aluminized glass Cloth). Gulf Co
Therm Polyurethane Aluglass Finished Insulation is easy to _t and installa
tion cost can save because of applying canvas cloth and vapour barrier will
not be required.
PIPE Support Inserts or DUCT Support Inserts faced with reinforced
Aluminium foil, Aluglass foil or Un-faced.
DUCT BOARD faced with one side reinforced Aluminium foil and other side
Kraft Paper or Aluglass foil finished.
\
Similar Products
View all
