Infusion Pump HY-800A
Send a free RFQ and get the supplier's best price.
Trade with confidence on Abraa
Safe and secure payments using Abraa safe trade systems
Supplier verification not completed
Pay only through Abraa to stay protected. Never pay a supplier by direct transfer.
Secure Payment
Pay through Abraa, never by direct transfer to a supplier.
Product Inspection
Book a check before shipping to confirm quality and quantity.
Buyer Protection
Get support and refunds if goods arrive not as described.
Verified Suppliers
Licence, address and on-site checks by the Abraa team.
Product Specification
| Brand | GUANGZHOU BEACONN MEDICAL SCIENCE TECHNOLOGY CO., LTD |
| Condition | New |
Product Descriptions
GUANGZHOU BEACONN MEDICAL SCIENCE TECHNOLOGY CO., LTD
|
HY-800A infusion pump parameters |
|
| Applicable infusion set | Standard PVC infusion device (10,15,20,60 drops / ml, diameter: 3.4 ~ 4.5 mm |
| Infusion method | Drop speed (optional), volumetric |
| Infusion accuracy | Infusion drip rate error: ≤ ± 2%; flow rate infusion error: ≤ ± 5% (standard PVC infusion after calibration) |
| Drop rate setting range | 10 drops / ml infusion: 1 to 200 drops / min; 15 drops / ml infusion: 1 to 300 drops / min 20 drops / ml infusion: 1 to 400 drops / min; 60 drops / ml infusion Device: 1 ~ 150 drops / min |
| Flow rate setting range | 1.0 ml / hr to 1200 ml / hr |
| Preset the infusion volume | 1 to 9999 ml |
| Speed of discharge | 600 ml / h |
| BOLUS | Preset speed of 600 ml / h, total 2 ml, set adjustable |
| KVO function | 1 ml / hr |
| Bubble detection | Ultrasonic bubble detection: ≥ 50ul of bubbles, 50 ~ 100ul sensitivity is low, medium and high third gear can be adjusted |
| Blocking alarm | Low sensitivity, medium and high third gear can be adjusted |
| Audible alarm | Alarm, alarm, alarm, alarm, alarm, alarm, alarm, alarm, alarm, alarm, alarm, alarm, alarm, alarm. |
| Power requirements | ≤ 25VA, 85V ~ 265V, 50Hz / 60Hz |
| display | 3.2 inch LCD screen |
| battery | DC12V, 2300mAh (fully charged in the "25 ml / hour" infusion speed using more than 4 hours) |
| working environment | Temperature +5 ℃ ~ +40 ℃, relative humidity ≤ 80% (no condensation), atmospheric pressure 70KPa ~ 106Kpa |
| Dimensions | 167mm X 125mm X 115mm |
| weight | 1.9kg |
\