We design the best suited system to your needs with selection of high quality equipments, step design in proper range, properly selected protection elements and the modular structure, and we claim that once installed, you will forget that you have a compensation system.
Why? Because our thyristor switched systems compared to the conventional electromechanical systems, has three major advantages.
Transient free switching:
At switching instants no inrush current occurs on capacitors, life time of the capacitors extend
Fast response (<20ms) :
Meets the required reactive power instantaneously, saves you from penalties.
Infinite switching :
Thyristors do not have problems such as wear, abrasion, adhesion like electromechanical switches
General System Features:
Standard: TS EN 60439
Rated voltage: 230V to 690V (50Hz)
Rated power: maximum 300kVA in a panel (single cubicle)
To a maximum level of 100kVAr for single step
Surge arrester protection
Test voltage: 2.5 kV / 1 min
IP.43 protection class cabin
Expandable modular structure
High resistance against corrosion: galvanized steel frame and internal construction
Electrostatic powder coated galvanized steel doors and covers
Color: RAL.7035 (black base)
Operating temperature -10 / +40 oC
Cooling: Thermostat-controlled forced ventilation
Bottom cable entry (optionally also be done from the top)
Independent distribution bus for each cubicle.
Push-pull type compensation modules
Connection ready external terminals (voltage, current, signal, etc..)
High quality cabling and electromechanical hardware