Name: SATRONIK_LS- Plasma Cutting Systems
Rating: 5 (18 reviews)

Request for quotation

SATRONIK_LS  is a CNC-controlled gantry flame cutting machine combining high efficiency, flexibility and robustness. The machine has been designed for high-precision-cutting and oxy fuel flame cutting for limited material thicknesses. SATRONIK_LS  is a machine concept available for working widths from 2.0 – 6.0 m in 2.0 m increments.
<table>
<tr>
<td>
<ul>
<li>Gantry bridge in warp-resistant and air-cooled framework construction, universally applicable for all thermal cutting processes.</li>
</ul>
</td>
</tr>
<tr>
<td>
<ul>
<li>Positive bilateral longitudinal drive with three-phase synchronous motors and magnet clutches,  integrated in two mass-optimized carriages</li>
</ul>
</td>
</tr>
<tr>
<td>
<ul>
<li>Transverse guide by soil-resistant rod guides, ground and hardened. High-quality toothed belt free from backlash, with high-capacity three-phase synchronous motor and high-precision planetary gear</li>
</ul>
</td>
</tr>
<tr>
<td>
<ul>
<li>Heat protection plates below gantry bridge</li>
</ul>
</td>
</tr>
<tr>
<td>
<ul>
<li>Engergy chains in guides on the bridge</li>
</ul>
</td>
</tr>
<tr>
<td>
<ul>
<li>Available in left-hand or right-hand execution</li>
</ul>
</td>
</tr>
<tr>
<td>
<ul>
<li>Can be equipped for plasma, oxy fuel and marking processes</li>
</ul>
</td>
</tr>
<tr>
<td>
<ul>
<li>Slewable plasma bevel torch blocks</li>
</ul>
</td>
</tr>
<tr>
<td>
<ul>
<li>Overhead extraction</li>
</ul>
</td>
</tr>
<tr>
<td>
<ul>
<li>Special tools</li>
</ul>
</td>
</tr>
</table>

Quantity

Ship to Country

Member since : 19-jan-2017

MIDDLE EAST TECHNOLOGIES F.Z.E

Basic Member

GO TO STORE

Request for quotation

Quantity

Ship to Country

ماشین برش فلز

SATRONIK_LS- Plasma Cutting Systems

Highlights :

Min Order : 50
Condition : New
Warranty: : YES
Country of shipping :

Safe and secure payments using Abraa safe trade systems

Item Details

Product Specification

	Middle East Technologies
	New
	YES

Product Descriptions

SATRONIK_LS is a CNC-controlled gantry flame cutting machine combining high efficiency, flexibility and robustness. The machine has been designed for high-precision-cutting and oxy fuel flame cutting for limited material thicknesses. SATRONIK_LS is a machine concept available for working widths from 2.0 – 6.0 m in 2.0 m increments.

Gantry bridge in warp-resistant and air-cooled framework construction, universally applicable for all thermal cutting processes.

Positive bilateral longitudinal drive with three-phase synchronous motors and magnet clutches, integrated in two mass-optimized carriages

Transverse guide by soil-resistant rod guides, ground and hardened. High-quality toothed belt free from backlash, with high-capacity three-phase synchronous motor and high-precision planetary gear