Product Descriptions
Designed for use in 1-8 bay NAS environments within home, SOHO, and SMB environments, the 10TB IronWolf 7200 rpm SATA III 3.5" Internal NAS HDD (CMR) from Seagate is built to withstand 24x7 operations or 8760 hours per year. This 10TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5" form factor, an air drive design, and a 256MB cache, providing users with an ample storage capacity and data transfer speeds of up to 210 MB/s. This IronWolf hard drive also has an MTBF rating of 1 million hours, 600,000 load/unload cycles, 1 in 1015 non-recoverable read errors per bit read, and a workload rate of up to 180TB per year.
Key Features • 10TB Storage Capacity
• 3.5" Form Factor
• SATA III 6 Gb/s Interface
• 256MB Cache
• 7200 rpm
• Up to 210 MB/s Data Transfer Rate
• 1 Million Hours MTBF
• Workload Rate: 180TB per Year
• 8760 Power-On Hours per Year
• 600,000 Load/Unload Cycles
Specifications
Storage Capacity Total: 10 TB SATA III (6 Gb/s) 3.5" HDD (7200 rpm) Read Speed Maximum: 210 MB/write Write Speed Not Specified by Manufacturer Buffer 256 MB Latency 4.2 ms HDD Specs Heads 10 Platters 5 Areal Density 1215 Gb/in² Disk Sector Format 512e Noise Level 2.8 dB (Active)
1.8 dB (Idle) Reliability / Data Integrity Annualized Failure Rate (AFR) 0.87 % Encryption None Endurance (Total Bytes Written) 180 TB Load/Unload Cycles 600,000 Mean Time Between Failures (MTBF) 1.0 Million Hours Non-Recoverable Read Errors per Bits Read 1 in 1015
Electrical Power Draw 10.1 W (Active)
7.8 W (Idle)
1.0 W (Standby) Supported Voltage 5 VDC, 12 VDC Current 1.8 A at 12 VDC Environmental Operating Temperature 41 to 158°F / 5 to 70°C Storage Temperature -40 to 158°F / -40 to 70°C Operating Shock 70 G / 2.0 ms Storage Shock 300 G / 2.0 ms Operating Humidity 5 to 95% Storage Humidity 5 to 95% Operating Altitude -1,000 to 10,000' / -304.80 to 3048 m Storage Altitude -1,000 to 40,000' / -304.80 to 12,192 m General Certifications FCC, UL, cUL