Product Descriptions
Wholesale supply of Synology E10M20-T1 M.2 SSD & 10GbE Combo Adapter Card for retailers, distributors and corporate buyers. Request a quote with quantity and destination.
Model: E10M20-T1
Designed for select models of their NAS arrays, the E10M20-T1 M.2 SSD & 10GbE Combo Adapter Card from Synology helps you simultaneously boost I/O performance and network bandwidth using one PCIe expansion slot on your NAS. This card two M.2 slots, each of which supports an M.2 2280 or 22110 SSD, plus a 10Gb Ethernet port that also supports speeds of 5 Gb/s, 2.5 Gb/s, 1 Gb/s, and 100 Mb/s. The E10M20-T1 also features a PCIe 3.0 x8 host bus interface and a low profile/full height form factor.
Key Features
- For Select Synology NAS Units
- Create an SSD Cache via PCIe
- Dual M.2 2280/22110 Slots
- 10Gb Ethernet Port
- PCIe 3.0 x8 Host Bus Interface
- Low Profile and Full Height Form Factor
Specifications
General: Host Bus Interface / PCIe 3.0 x8
Bracket Height: Low Profile and Full Height
Size (Height x Width x Depth): 71.75 mm x 200.05 mm x 17.70 mm
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -20°C to 60°C (-5°F to 140°F)
Relative Humidity: 5% to 95% RH
Warranty: 5 Years
Notes: The warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)
Storage: Storage Interface / PCIe NVMe
Supported Form Factor: 22110 / 2280
Connector Type and Quantity: M-key, 2 Slots
Network: IEEE Specification Compliance / IEEE 802.3x Flow Control IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet IEEE 802.3an 10Gbps Ethernet
Data Transfer Rates: 10 Gbps
Network Operation Mode: Full Duplex
Supported Features: 9 KB Jumbo Frame TCP/UDP/IP Checksum Offloading Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s TCP Segmentation Offload (TSO) Large Send Offload (LSO) Receive Side Scaling (RSS) Generic Receive Offload (GRO) Generic Segmentation Offload (GSO)
Compatibility
Applied Models: NVMe SSD / SA series: SA3600, SA3400, SA6400 23 series: RS2423RP+, RS2423+ 22 series: RS822RP+, RS822+, DS3622xs+, DS2422+ 21 series: RS4021xs+, RS3621xs+, RS3621RPxs, RS2821RP+, RS2421RP+, RS2421+, RS1221RP+, RS1221+ 20 series: RS820RP+, RS820+ 19 series: DS2419+, DS2419+II, DS1819+ 18 series: RS3618xs, RS2818RP+, DS3018xs, DS1618+ 17 series: RS18017xs+, RS4017xs+, RS3617xs+, RS3617RPxs, DS3617xs, DS3617xsII
Notes: DSM version requirement: 6.2.3-25426 or later version DSM version requirement for RS18017xs+, RS4017xs+, RS3618xs, RS3617xs+, RS3617RPxs, DS3617xs and DS3617xsII: 7.0.1 or later version