Synology RackStation RS822+ 4-Bay NAS Enclosure, AMD Ryzen V1500B Quad-Core 2.2GHz, 2GB DDR4 RAM, Diskless, 4 x Gigabit ETH, PCIe Gen 3.0 – Wholesale

Wholesale supply of Synology RackStation RS822+ 4-Bay NAS Enclosure for retailers, distributors and corporate buyers. Request a quote with quantity and destination. Model: RS822+ Synology RS822+ External HDD/SSD The RackStation RS822+ 4-Bay NAS Enclosure from Synology is a 4-bay rackmount NAS enclosed in a compact 1 RU chassis. Running the Synology DiskStation Manager (DSM) operating system, it is ideal for data backup, sharing, and synchronization. Its small size, stable performance, and storage scalability make it suitable for branch offices and small- and medium-sized businesses with ever-increasing data management needs. It delivers sequential read speeds of up to 2103 MB/s and sequential write speeds of up to 1074 MB/s and has four drive bays, each of which natively supports 3.5" SATA hard drives, as well as 2.5" SATA hard drives and SSDs. Should users need to expand the overall capacity of their RS822+, the optional RX418 expansion unit offers an additional four drive bays. This model is powered using a single power supply. Key Features - 4 x 3.5/2.5" SATA Drive Bays - 2.2 GHz AMD Ryzen V1500B Quad-Core - 2GB of DDR4 ECC RAM - 4 x Gigabit Ethernet Ports - 2 x USB 3.2 Gen 1 Type-A | 1 x eSATA - 1 x PCIe Gen 3.0 x8/x4 Slot - RAID 0, 1, 5, 6, 10, Hybrid, Basic, JBOD - AES-NI Hardware Encryption Engine - Single Power Supply - Synology DiskStation Manager OS (DSM Specifications CPU: CPU Model / AMD Ryzen V1500B CPU Quantity: 1 CPU Architecture: 64-bit CPU Frequency: 4-core 2.2 GHz Hardware Encryption Engine (AES-NI) Memory: System Memory / 2 GB DDR4 ECC SODIMM Memory Module Pre-installed: 2 GB (2 GB x 1) Total Memory Slots: 2 Maximum Memory Capacity: 32 GB (16 GB x 2) Notes: Synology reserves the right to replace memory modules with the same or higher frequency based on supplier's product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance. Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion. For more information about the recommended memory configurations, please check the Hardware Installation Guide of your Synology product. Storage: Drive Bays / 4 Maximum Drive Bays with Expansion Unit: 8 (RX418 x 1) Compatible Drive Type* (See all supported drives): 3.5" SATA HDD 2.5" SATA SSD Hot Swappable Drive* Notes: "Compatible drive type" indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay. The maximum raw capacity is not limited by the maximum single volume size. Synology NAS models may utilize capacities over the maximum single volume size as long as each volume created is below the limit. (Learn more) External Ports: RJ-45 1GbE LAN Port* / 4 (with Link Aggregation / Failover support) USB 3.2 Gen 1 Port*: 2 eSATA Port: 1 Notes: This device's 1GbE LAN ports have a maximum transmission unit (MTU) size of 1,500 bytes. The USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers Forum (USB-IF) in 2019. PCIe: PCIe Expansion / 1 x Gen3 x8 slot (x4 link) File System: Internal Drives / Btrfs EXT4 External Drives: Btrfs EXT4 EXT3 FAT NTFS HFS+ exFAT Appearance: Form Factor (RU) / 1U Size (Height x Width x Depth): RS822+ :44 mm x 480 mm x 492.6 mmRS822RP+ :44 mm x 480 mm x 518.6 mm Weight: RS822+ :6.4 kgRS822RP+ :8.0 kg Rack Installation Support*: 4-post 19" rack (Synology Rail Kit - RKM114/RKS-02) Notes: The rail kit is sold separately