Ubiquiti Networks Wave AP UISP Outdoor Wi-Fi 6 Access Point, 60GHz Band, Up to 5Gb/s Speed, GPS & Bluetooth, 15 Clients – Wholesale

Wholesale supply of Ubiquiti Networks Wave AP UISP Outdoor Wi-Fi 6 Access Point for retailers, distributors and corporate buyers. Request a quote with quantity and destination. Model: Wave-AP Wave AP Powered by Wave Technology. The Wave Access Point can connect up to 15 stations and deliver up to 5.4 Gbps total throughput (2.7 Gbps duplex). It is equipped with a high-performance 5 GHz backup radio to ensure uninterrupted connection, as well as a Bluetooth radio to simplify setup in the UISP Mobile app. Key Features - 60 GHz PtMP access point powered by Wave Technology. - 60 GHz 5.4 Gbps max. throughput (2.7 Gbps duplex) main radio - 30° sector coverage - 5 GHz 800+ Mbps weather-resilient backup radio - 5 GbE and (1) 10G SFP+ WAN ports - 15 client capacity: — Wave Pro (8 km link range) — Wave Long-Range (8 km link range) — Wave Nano (5 km link range) - Integrated GPS & Bluetooth Specifications Mechanical Dimensions: 212 x 205 x 187 mm (8.3 x 8.1 x 7.4") Weight: 2.3 kg (5.07 lb) Enclosure materials: Aluminum alloy, UV stabilized polycarbonate Pole mount diameter: 25 to 76 mm (1 to 3") on pipe outer diameter Wind loading: 98 N at 200 km/h (22 lbf at 125 mph) Weatherproofing: IPX6 Hardware Processor: Quad-core ARM® Cortex®-A53 at 1.4 GHz Memory: DDR3L 512 MB Networking interface: (1) 2.5GbE RJ45 port (100/1000/2500)* Max. power consumption: 24W Power method: Passive PoE 4-pairs, Passive PoE 2-pairs (for 44–54V DC only) Power supply: 48V DC, 0.65A 2.5GbE PoE adapter (included) Supported voltage range: 44–54V DC, 22–27V DC GPS: Yes Button: Factory reset LEDs: Power, Ethernet, GPS Operating temperature: -40 to 60° C (-40 to 140° F) Operating humidity: 5 to 95% non-condensing Certifications: FCC, IC, CE Software Operating mode: PtMP access point Ubiquiti specific features: Wave technology Services: UISP, ping watchdog, NTP client, SNMP Tools: Antenna alignment, discovery utility, ping, trace route, speed test Network: Bridge mode Application requirements: UISP: Version 1.5.7 and later System Total throughput: 5.4 Gbps (2.7 Gbps duplex) Supported clients count: 15 Max. range: Connecting to a Wave Pro: up to 8 km Encryption: WPA2-PSK (AES) RF Operating frequency: 57–71 GHz (Depends on regulatory region) Channel bandwidth: 2160, 1080 MHz Operating channels: 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz (Depends on regulatory region) Modulation: 16QAM, QPSK Antenna gain: 24 dBi Polarization: Vertically linear Beamwidth: Azimuth: 3 dB 30°, Elevation: 3 dB 3° Electrical downtilt: 0° Back-Up RF WiFi standard: 802.11ax (WiFi 6) Operating frequency: US/CA: 5150 - 5250 MHz, Worldwide: 5150 - 5875 MHz (Depends on regulatory region) Channel bandwidth: 20, 40, 80 MHz Modulation: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM Antenna gain: 12 dBi Cross-pol isolation: 10 dB Polarization: Dual-linear Beamwidth: Azimuth: 3 dB 35°, Elevation: 3 dB 60° Electric downtilt: 0° LEDs Power: Flashing white: bootup in progress, White: not connected to UISP application, Blue: connected to UISP application, Flashing blue: locate in progress, Blue/white: firmware upgrade in progress Ethernet: Flashing white: Ethernet traffic detected, Flashing blue: SFP+ traffic detected GPS: Blue: receiving at least (4) GPS satellite signal