Product Descriptions
Pro 24 PoE
A 24-port, Layer 3 switch capable of high-power PoE++ output.
Specifications
Dimensions (W × D × H) 442 × 285 × 44 mm (17.4 × 11.2 × 1.7 in) Form Factor Rack Mount, 1U Port Layout 24 × 1GbE RJ45 (16 × PoE+, 8 × PoE++), 2 × 10G SFP+ RJ45 Port Speed 10/100/1000 Mbps SFP+ Port Speed 1G / 10G Maximum PoE Output Up to PoE++ Total PoE Budget 400W Redundancy DC Power Backup (USP RPS) Layer 3 Support Yes Switching Capacity 88 Gbps Total Non-Blocking Throughput 44 Gbps Forwarding Rate 65 Mpps Supported VLANs 1,000 MAC Address Table Size 16,000 Entries IPv4 Static Routes 2 Packet Buffer Size 2 MB IPv4 ACL Entries 128 MAC ACL Entries 128 DHCP Server Supported DHCP Relay Supported Inter-VLAN Routing Supported Static Routing Supported LACP Port Aggregation Supported STP / RSTP Supported QoS (DSCP) Supported IGMP Snooping Supported Advanced IGMP Features Querier, Fast Leave, Router Port 802.1X Authentication Supported Port Isolation Supported Port Mirroring Supported Jumbo Frames Supported Voice VLAN Supported LLDP-MED Supported Loop Protection Supported Flow Control Supported Storm Control Supported PoE+ Ports 16 PoE++ Ports 8 Maximum PoE per Port PoE: 15.4W, PoE+: 30W, PoE++: 64W Power Supply Internal AC/DC, 450W Power Input 100–240V AC, 50/60Hz Backup Power Input USP RPS DC Input Maximum Power Consumption 50W (excluding PoE), 450W (including PoE) Heat Dissipation 170.6 BTU/hr (excluding PoE output) Management Interface Ethernet LCM Display 1.3-inch Touchscreen ESD Protection Air: ±16kV, Contact: ±12kV Enclosure Material SGCC Steel Supported Rack Depth 400–1200 mm (15.7–47.2 in) Weight (Without Brackets) 4.3 kg (9.5 lb) Weight (With Brackets) 4.4 kg (9.7 lb) Operating Temperature -5°C to 40°C (23°F to 104°F) Operating Humidity 10% to 90% Non-Condensing NDAA Compliant Yes Certifications CE, FCC, IC, Anatel Software Requirement UniFi Network v5.10.5 or later Pro AV Profiles Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron