A vertical form, fill and seal machine for producing centre sealed sachets handling all types of free flowing/non-free flowing powders/ granules.
The model MB-25 handles a single reel film stock. Max. reel width is 330 mm on 76 mm core. The machine has the facility to be provided with a variety of filling heads. Draw down of the film is through draw down belts controlled through a Electromagnetic Clutch Brake combination. The length of the bag is controlled by print registration system which is PLC based. For unprinted film the bag length can be adjusted from the single touch key pad provided on the front panel.
Powders (Free and Non-free flowing), Granules, Pulses, Beans, Spices, Soup mixs, Detergents, Pharmaceutical and Agricultural Powders,Tea, Coffee, Sugar, Rice, etc.
From 2 gms to 200 gms depending upon bulk density of products
Up to 60 packs per minute, depending on product flow properties and pack size
Width from 40 mm to 175 mm
Length from 70 mm to 250 mm
Alternate Filling Systems
The MB-25 Machine can be fitted with any one of the following fillers :
The machine will accept most types of laminated films up to maximum of 500 gauge. It is important that the sealing medium incorporates the best possible slip characteristics. Pure unsupported polythene film may be used with special impulse sealing equipment.
|•||Power Input||3 phase 415 V AC, 50Hz|
|•||Motor||0.5 HP, 3 phase 415 V AC motor,
Options : VFD Controls
|•||Heaters||300 W x 3 pcs|
|•||Temperature Controller||Digital Temperature Controller with FEK thermocouple|
|•||Fully automatic photo cell control system|
Dimensions & Weight
|Floor Area||600 mm x 600 mm|
|Height||2000 mm with hopper|
|Nett Weight||500 kgs|
|Air||6.0 kg/cm2 g|
Take off conveyor, batching device, tear-cut device, coding, perforator between sachets, over-printing attachment, gas flushing and infeed product elevator system.
No Feedbacks yet.