A vertical form, fill and seal machine for producing centre sealed pouches handling all types of free flowing/non-free flowing powders.
The model MB-250 handles a single reel film stock. Max. reel dia. is 530 mm on 76 mm core. The machine has the facility to be provided with a variety of filling heads. Draw down of the film is through draw down belts controlled through a servo motor. The length of the bag is controlled by print registration system which is PLC based. For unprinted film, the bag length can be adjusted from the single touch key pad provided on the front panel.
Powders (Free and Non-free flowing), such as Spices, Soup Mixes, Detergents, Yeast, Desserts, Pharmaceutical and Agricultural Powders, Flour (Atta), Cocoa Powder, Drinking Chocolate, Coffee, Sugar.
50 gms to 2500 gms.
Depending upon bulk density of products.
Extended ranges up to 5 kgs available on request.
Up to 65 packs per minute, depending on product flow properties, pack size and fill weight.
Width from 60 mm to 250 mm, Length from 80 mm to 350 mm.
Alternate Filling System
The MB - 250 machine can be fitted with any one of the following fillers
The machine will accept most types of laminated films up to a maximum of 500 gauge.
It is important that the sealing medium incorporates the best possible slip characteristics. Pure unsupported polythene film may be used with special impulse sealing equipment.
|•||Power Input||3 phase 415 V AC,50Hz||1000 mm X 1125 mm|
|•||Motor||Servo Motor 6 Nm||2450 mm with Hopper|
|•||Heaters||350 W x 3 pcs||1500 Kgs|
|•||Temperature Controller||Digital Temperature Controller with FEK thermocouple|
|Fully automaticphotoCell control||Fully automaticphoto Cell control|
Dimensions & Weight
|•||Floor Area||1000 mm X 1125 mm|
|•||Height 250||2450 mm with Hopper|
|•||Nett Weight||1500 Kgs|
Take off conveyor, batching device, tear - cut device, coding, perforator between sachets, overprinting attachment, gas flushing and in-feed product elevator system.
No Feedbacks yet.