A vertical form, fill and seal machine for producing centre sealed pouches handling all types of free flowing / non-free flowing powders/granules.
The model MB-250 EV handles a single reel film stock. Max. reel dia. is 530 mm on 76 mm core. The machine has the facility to be provided with a variety of filling heads.
Draw down of the film is through draw down belts controlled through an Electromagnetic Clutch Brake combination. The length of the bag is controlled by print registration system which is PLC based. For unprinted film, the bag length can be adjusted from the single touch key pad provided on the front panel.
Powders (Free and Non-free flowing), Granules, Pulses, Beans, Detergents, Desserts, Pharmaceutical and Agricultural Powders, Tea, Coffee, Sugar, Rice, etc.
500 gms to 5000 gms. Depending upon bulk density of products.
Up to 50 packs per minute. Depending on product flow properties and pack size.
Alternate Filling System
The MB-250 EV-Machine can be fitted with any one of the following fillers :
The machine will accept most types of laminated films up to a maximum of 500 gauge. It is important that the sealing medium incorporates the best possible slip characteristics. Pure unsupported polythene film may be used with special impulse sealing equipment.
|Power Input||3 phase 415 V AC, 50 Hz|
|Motor driven through VFD||1.5 HP, 3 phase 415 V AC|
|Heaters||300 w X 3pcs|
|Temperature Controller||Digital Temperature Controller with FEK thermocouple|
|Fully automaticphotoCell control|
Dimensions & Weight
|Floor Area||1500 x 2400 mm with frame|
|Height 250||3000 mm with hopper|
|Nett Weight||1500 Kgs|
Take off conveyor, batching device, tear-cut device, coding, perforator between sachets, over-printing attachment, gas flushing and infeed product elevator system.
No Feedbacks yet.