DUSEEL 300 Protective Coating

DUSEEL 300 is a superior quality, general-purpose bitumen protective coating blended with special Bitumen and Petroleum solvents. It is solvent based with high performance and durability.

FEATURES AND BENEFITS

• Quick dry
• Tack free
• Excellent protective coating
• Highly flexible
• Anti corrosion property
• Self-sealing to minor cracks
• Seamless and adaptable to irregular surface
• Compatible with other bituminous products
• Excellent bonding and adhesion property
• Cold applied, easy application 

SPECIFICATION COMPLIANCE

DUSEEL 300 conforms to the requirements of ASTM, UEAtc and other relevant International Standards.

QUALITY ASSURANCE AND WARRANTY

Duproof is ISO Quality Assured Company, and DUSEEL 300 carries a material warranty against any manufacturing defect.

MAIN USES

DUSEEL 300 is used as

• Protective coating of built-up roofs and repair of existing bitumen waterproofing sheet membranes.
• Damp proofing protective coating for wet areas viz. bathrooms, basements and kitchen floors and walls.
• The high flexibility and durability of DUSEEL 300 makes it ideal to be used on construction works such as bridges, underground concrete foundations, basements, spouts, gutters, concrete walls and floors.
• Vertical surfaces like cellar walls and pipelines.
• Protective coating of metal surfaces against corrosion. 

METHOD OF APPLICATION

Substrate Preparation

1. All substrates must be clean and sound, free from dirt, dust, soil, grease, oil and other loose particles. Substrates that are very dry should be applied with a penetrative coating of DUPRIME.
2. Stir the solution prior to use thoroughly if stored for a long time.

Application System on Porous substrate (Concrete Structure)

1. Apply minimum 2 coats by brush or spray equipment.
2. The second coat is applied when the first coat has completely dried.
3. Apply each coat at a right angle to the previous coat to achieve good coverage and uniformity.
4. A third coat is required for very porous substrate.
5. Drying time is 4-6 hours under normal conditions. 

Application System on Metal Structures

1. Clean the substrate by removing rust, scale and dirt using wire brush. Wipe off traces of oil and grease with a suitable solvent.
2. Apply a minimum 2 coat by brush or spray equipment.
3. The second coat is applied when the first coat has completely dried.
4. Drying time is 4-6 hours under normal conditions.

DUSEEL 300 is recommended to apply at temperatures between 5oC to 50oC.

PACKING AND STORAGE

DUSEEL 300 is available in 20 liter pails and 200 liter drums, palletized and strapped. Shelf life of 6 months in a tightly closed container. Avoid direct exposure to heat and sunlight.