LAMINATION MACHINE HIGH SPEED 200 MT. (SOLVENT BASE) - WEBMATE SB 1
Send a free RFQ and get the supplier's best price.
Trade with confidence on Abraa
Safe and secure payments using Abraa safe trade systems
Supplier verification not completed
Pay only through Abraa to stay protected. Never pay a supplier by direct transfer.
Secure Payment
Pay through Abraa, never by direct transfer to a supplier.
Product Inspection
Book a check before shipping to confirm quality and quantity.
Buyer Protection
Get support and refunds if goods arrive not as described.
Verified Suppliers
Licence, address and on-site checks by the Abraa team.
Product Specification
| Brand | C.Trivedi |
| Condition | New |
| Warranty | YES |
Product Descriptions
C. Trivedi Present the ultimate New Invention of Solventbase Lamination machine - Webmate, which is easy to handle, install and oprate
and fit in small place it takes care of large Quality of Lamination Material.
TECHNICAL SPECIFICATIONS:
- Web Width: 400 – 2400mm
- Unwind Rewind Diameter: 600 - 1000mm
- Hot Air Temp: 50 – 150 / 250°C
- Machine Speed: 60 – 200 M/Min.
- Heat Source: Hot Air Generator / Thermic Fluid System (Optional)
- Exhaust: 3/5 HP
- Synchronized Drive: 5 HP / 5 / 7.5,10 / 3 HP for Coater
- Nip, Rewind & Positive Drive (Optional)
- Material to be Laminated: Polyester/Poly/Paper/BOPP/Aluminum Foil/HDPE Fabrics etc.
SALIENT FEATURES:
- Heavy duty C.I. Cast iron & Heavy fabricated structure
- Gravure type coating system
- Liner type impression pressure assembly actuated with pneumatic piston for rubber roll Doctor blade and Nip Roller
- Fully insulated imported special glass wool sheet fitted in the panel (Top side & Bottom) For controlling heat loss
- One & One Slit type counter air flow arrangement, Divided equally are placed against roller for proper web support
- Exhaust are distributed through-out the length of drying chamber & individual exhaust duct for each zone
- Digital temperature controller with indicator & PT 100 sensor for each Zone
- Inside heating for Nip Steel roller
- Heavy duty Shaft types fix Rewinder with motor
REWIND STATION:
- A. C. synchronize Drive with Load cell
- Center winding system / Surface
HOT AIR GENERATOR:
- Diesel / Fired Air Heater
- Thermic fluid Heater with Blower
COATING UNIT:
- Independent A.C. Drive
- Pre – Heating / Exhaust
UNWIND STATION:
- Tension control Brake Unit with load cell feedback (Pneumatic/Motorized)
- Moveable unwind with web guide
OPTIONAL ATTACHMENT:
- Air Shaft
- Pull roll assembly (In feed drive)
- May bar / Reverse roll, Air knife Three roll
- Wet Lamination arrangement
- Extra blower & Exhaust Individual for each zone
- Chill Roll
- Bow Roller
- Ink Circulating with Viscosity Control
- Touch Screen Operated control for all drive
DRY LAMINATION UNIT:
- Web Chaser
\
