|Brand||Drives & Drives|
Anchorage point for load lifting. Can be used with stud bolts and or threaded screws.
Safety coefficient 4 in all loading directions
Designed, tested and certified in compliance with the technical directives GS-MO 1504 – EN 1677
Suitable for safe lifting in compliance with the machinery directive 2006/42/EC
Can be oriented at 360° Tested at 100 % magnaflux Tested at 20.000 stress cycles Worm nut
Can be screwed on with a spanner
On the axial pull there can be variation of +/-5° with a 10% decrease in capacity
The threaded pivot must always be screwed on completely along the length of the nut
No Feedbacks yet.